Autonics GP Series User Manual

301
●Overlap of screen configured security
When it is switched into base screen with overlapped screen, higher security level of screen than
the base screen is not displayed and same or lower security level of screen is displayed.
The operation of screen switching when designating security level and password as below in
editor.
Screen Security level Password
Base screen 1 0 --
Base screen 2 1 11
Base screen 3 2 22
Base screen 4 3 33
•In case of overlapping base screen 2,3 on base screen 1 in editor,
Base screen is only displayed when calling base screen 1 in main device.
•In case of overlapping base screen 2,4 on base screen 3 in editor,
When calling base screen 3 from main device, keypad is displayed automatically and
registering password of security level of base screen 3, base screen 3 overlapped base screen
2.
●Security for using upload/memory function
When using upload/memory function in editor, allowed user only can use this function
registering password.

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English