Autonics GP Series User Manual

303
⑥List
• It shows password register for each security level 1~15.
• If password is designated, it is displayed as *******.
• It is able to designate security level 0~15 for each base screen in screen
auxiliary configuration.
• Security level 1~15 can be designated with 8 digits using 0~9.
• For level designated password, it is showed as “********” regardless of digit.
• The screen with security level 0 can access without inputting password.
• Security level is 1~15, it is accessed with inputting password. When specific
security level is inputted, the lower security level of screen is opened without
inputting password.
• If base screen and system screen with security level not configured among
1~15, it is able to access inputting higher level of password.
• Supply power again in a status of security releasing, all security will be in non-
release status.
⑦
Communication
password
• Password using in communication is configured, it is displayed as *******.
• When using upload/memory function, GP data and memory is uploaded
inputting password and password input window is popped up automatically.
⑧Register
• Register password applying for using upload/memory function.
•
It is able to adjust when registered password is matched.
⑨Delete
• Delete password using in communication.
•
It is able to delete when password is matched.
⑩Display
password input
error
• Check to show error message when registered password is not matched in
main device.
•
When this is checked, it shows message as password is not matched.
⑪
Use system
screen security
• Check to use security function for system screen.
System screen
• It is activated when
⑪
is checked.
• Designate security level for each screen of system screen calling system
screen tap of screen auxiliary configuration.
•
When it checked, system screen button is activated, screen auxiliary
configuration window is displayed pressing a button. Security level of system
screen is 15 for default and it is able to designate security level of each system
screen in screen auxiliary configuration.
•
Security function for system screen is not used when check box of using
system screen security is not checked. Security level of system screen is
configured as 0.
• When password for the top security level is not registered among 1~15,
check in [Communication]-[Data check] for download.

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English