Calyx Point 7 - Page 30

12 Calyx Software
Installation
To set up the network configuration server:
1 From the Windows Start menu, select Start > All Programs > Calyx Software >
Point Network Configuration Server.
The
Point Network Configuration Server dialog box is displayed.
2 Complete the
Company Settings section.
a Complete the
CompanyName and AccountID fields.
b In the
ApplicationDirectory field, enter the directory path where Point is to be
installed on client machines.
c In the
TemplatesDirectory field, enter the shared directory path where the
templates will be stored. Alternately, click the ellipsis (...) button to browse to the
shared locations.
If a PNTTEMPL folder does not currently exist, select the shared location that will
contain the folder and type PNTTEMPL. It is created during the initial Point
installation.
A Universal Naming Convention (UNC) path is shown in the
TemplatesDirectory
field (for example, \\servername\PNTTEMPL) unless a drive was mapped to that
location.
d In the
DataFolders field, click Browse, select a shared data folder, and click OK.
e Click Add to List. Use the Remove from list button to delete any unused or
empty data folders.
f Repeat Step d and Step e for all data folders.
g To preserve data folder settings on client computers where Point was previously
installed, select the
Do Not override existing Data Folder Settings check box.