Calyx Point 7 - Escrow and Title

Point User Guide 275
Supplementary screens
5 Click the Flood tab to view the flood insurance policy information.
6 Edit the insurance information as needed.
7 Click OK to save any changes and exit the dialog box.
Escrow and title
The Escrow & Title Information dialog box is used to record escrow, closing agent,
and title information. It is accessible by clicking the Escrow & Title button which is located
at the bottom of the workspace in the
Conditions and Closing screens.
Tip
The Flood dialog box is automatically populated when flood insurance is
requested through the Point Services interface.
Important
Information is retained in each tab when you switch to another tab.
However, you must click OK when you exit the dialog box to
permanently save the changed data.
Click Cancel to exit the dialog box without saving any changes.
Related information
For information about ordering flood and hazard insurance by using the
Point Services interface, refer to Flood certifications, on page317 and
Hazard insurance quotes, on page318.