356 Calyx Software
Templates
The Closing Cost Scenario: Template screen is displayed.
3 In the
ClosingCostScenarioName field, enter a brief, descriptive name of the
template. This name displays in the closing cost scenario list when you select the
template.
4 Enter the standard fees that you would use for the loan type.
5 Save the file.
Attention
To create a template for the MLDS:
1 In the closing cost scenario template, select Forms > MLDS (CA
GFE).
2 Proceed as you would when completing the GFE.
For more information about closing cost scenario templates, see
Knowledge Base article #0120 Creating Closing Cost Scenarios to default
the Good Faith Estimate.
Important
Do not change the file extension or Point will not recognize the template.
To Next Page