Configuring a Network with WDS-Managed APs
D-Link Unified Wired and Wireless Access System
July 2012 Page 699
D-Link UWS User Manual
i. Set the radio(s) that will participate in the WDS link to a static channel. In this example, the APs in the
WDS group use channel 36 on Radio 1 (IEEE 802.11a/n).
j. Click Apply.
k. Click Logout to log off of the AP.
2. Configure Satellite AP2 while it is in stand-alone mode.
a. Connect to the web-based administration interface for Satellite AP1 while it is in stand-alone mode.
b. Log on to Satellite AP2. The default username is admin, and the default password is admin.
On the home page (Basic Settings), note the MAC address of the AP. When you configure the WDS
Managed AP settings on the switch, you must provide the MAC address of the AP.
c. Access the Manage > Managed Access Point page.
d. For the WDS Managed Mode option, select Satellite AP.
e. In the WDS Group Password field, enter the password for the group, for example password12345.
f. Click Apply.
g. Access the Manage > Radio page.
h. Set the radio(s) that will participate in the WDS link to the same static channel configured on Satellite
AP1.
i. Click Logout to log off of the AP.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
