D-Link DWL-2600AP User Manual

Detecting and Preventing Wireless Intrusion
D-Link Unified Wired and Wireless Access System
July 2012 Page 737
D-Link UWS User Manual
If an employee using Tablet_5 attempts to use an unknown AP with one of the tablets, the DWS-4000
Series switch initiates a Client Threat Mitigation attack. The WLAN > Monitoring > Client > Detected Clients
page shows that the Tablet_5 client now has a client status of Rogue.
Click the MAC address of the client to display the client’s Detected Client Status page. As the following
figure shows, the client is detected as a threat, and the threat mitigation feature caused the AP to send a
deauthentication request to the client. Traffic transmitted by the rogue tablet is interrupted, and it is not
able to remain associated with the unknown AP.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm