Interfaces WideArea Networks(WANs)
IX20 User Guide
119
SureLink to disable the DNStest and use one or more other tests.
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network >Interfaces.
4. Select the appropriate WAN or WWAN on which SureLink should bedisabled..
5. After selecting the WAN or WWAN, click SureLink.
To Next Page
Loading...
Need help?
General