Digi IX20 - Page 142

Interfaces WideArea Networks(WANs)
IX20 User Guide
142
a. Click Network >Interfaces.
b. For Add Interface, type WWAN_Publicand click .
c. For Interface type, select Modem.
d. For Zone, select External.
e. For Device, select Modem .
f. (Optional): Configure the public APN. If the public APNis not configured, the IX20 will
attempt to determine the APN.
i. Click to expand APN list >APN.
ii. For APN, typethe public APN for your cellular carrier.
g. For Add Interface, typeWWAN_Private and click .
h. For Interface type, select Modem.
i. For Zone, select External.
j. For Device, select Modem .
This should bethe same modem selected for the WWAN_PublicWWAN.
k. Enable APN list only.
l. Click to expand APN list > APN.