Digi IX20 - Page 171

Interfaces WideArea Networks(WANs)
IX20 User Guide
171
4. Set the appropriate firewall zone:
(config network interface my_wwan)> zone zone
(config network interface my_wwan)>
See Firewall configuration for further information.
5. Select a cellular modem:
a. Enter modem device ?to view available modemsand the proper syntax.
(config network interface my_wwan)> modem device ?
Device: The modem used by this network interface.
Format:
modem
Current value:
(config network interface my_wwan)> device
b. Set the device:
(config network interface my_wwan)> modem device modem
(config network interface my_wwan)>
6. Set the SIMmatching criteria to determine when thisWWAN should beused:
(config network interface my_wwan)> modem match value
(config network interface my_wwan)>
Where value is one of:
n
any
n
carrier
Set the cellular carrier must be in activefor this WWAN to be used:
a. Use ?to determine available carriers:
(config network interface my_wwan)> modem carrier
Match SIM carrier: The SIM carrier match criteria. This
interface is applied when the SIM card is
provisioned from the carrier.
Format:
AT&T
Rogers
Sprint
T-Mobile
Telstra
Verizon
Vodafone
other
Default value: AT&T
Current value: AT&T