Digi IX20 - Page 337

Wi-Fi Configure a Wi-Fi accesspoint with enterprisesecurity
IX20 User Guide
337
3. Click Network >WiFi >Access points.
4. Create a new accesspoint or modify an existing accesspoint:
n
To create a new access point, for Add WiFi accesspoint:, typea name for the access
point and click .
n
To modify an existing accesspoint, click to expand the access point.
The Wi-Fi accesspoint configuration window is displayed.
5. For SSID, type the SSID. Up to 32 characters are allowed.
6. Enable SSID broadcast to configure the radio to broadcast the SSID.
7. (Optional) Enable Isolate clientsto prevent clients that are connected to this accesspoint
from communicating with each other. See Isolate Wi-Fi clients for information about how to
prevent clients connected to different accesspoints from communicating with each other.
8. For Encryption, select WPA2 Enterprise.
9. Configure one or more RADIUS servers:
a. Click to expand RADIUSserver list.
b. Click to expand RADIUS server.
c. For RADIUS IP/hostname, type the IPaddress or hostname of the RADIUSserver.
d. (Optional) Change the RADIUS port. Thedefault port is 1812.