Routing Virtual Router Redundancy Protocol (VRRP)
IX20 User Guide
472
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network >VRRP.
4. For Add VRRP instance, type a name for the VRRP instance and click .
The new VRRPinstance configuration is displayed.
5. Click Enable.
6. For Interface, select Interface: ETH2.
7. For Router ID, leave at the default setting of 50.
8. For Priority, type80.
9. Click to expand Virtual IP addresses.
To Next Page
Loading...