Virtual PrivateNetworks(VPN) OpenVPN
IX20 User Guide
568
Required configuration items
n
Avalid OpenVPNclient configuration. See Configure an OpenVPN client by using an .ovpn file
or Configure an OpenVPN client without using an .ovpn file for configuration instructions.
n
Enable OpenVPN SureLink.
n
The behavior of the IX20 device upon OpenVPN failure: either
l
Restart the OpenVPNinterface
l
Reboot the device.
Additional configuration items
n
The interval between connectivity tests.
n
Whether the interface should be considered to have failed if oneof the test targets fails, or all
of the test targets fail.
n
The number of probe attempts before the OpenVPNconnection is considered to have failed.
n
The amount of time that the device should wait for a response to a probe attempt before
considering it to have failed.
To configure the IX20 device to regularly probe the OpenVPNconnection:
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
To Next Page
Loading...
Need help?
General