Virtual PrivateNetworks(VPN) Dynamic Multipoint VPN(DMVPN)
IX20 User Guide
611
5. Configure NHRP:
a. Click Network >Routing Services.
b. Enable routing services.
c. Click to expand NHRP.
d. Enable NHRP.
e. Click to expand Network.
f. Click to add a network.
g. For Interface, select the interface created above.
h. For Tunnel, select the IPtunnel created above.
i. Click to expand Next hop servers.
j. Click to add a server.
k. For NBMAaddress, type the hostname or IPaddressof the node that will be the next hop
server.
6. Configure the overlay connection:
a. Click Network >Routing services>BGP.
b. Enable BGP.
c. For AS number, typethe autonomoussystem number for this device.
d. For Best path criteria, select Multipath.
e. Click to expand Neighbours.
f. Click to add a neighbour.
g. For IP address, typethe IPaddress of the hub.
To Next Page
Loading...