Virtual PrivateNetworks(VPN) L2TP
IX20 User Guide
622
b. Set the hostname or IPaddress of the L2TPnetwork server:
(config vpn l2tp lac lac_tunnel)> lns hostname
(config vpn l2tp lac lac_tunnel)>
c. (Optional) Set the UDPport to use to connect to the L2TPnetwork server:
(config vpn l2tp lac lac_tunnel)> port int
(config vpn l2tp lac lac_tunnel)>
where int isan integer between 1 and 65535. The default is1701.
d. (Optional) Set the username to use to log into the server:
(config vpn l2tp lac lac_tunnel)> username username
(config vpn l2tp lac lac_tunnel)>
e. (Optional) Set the password to use to log into the server:
(config vpn l2tp lac lac_tunnel)> password password
(config vpn l2tp lac lac_tunnel)>
f. (Optional) Set the metric for the tunnel:
(config vpn l2tp lac lac_tunnel)> metric int
(config vpn l2tp lac lac_tunnel)>
where int isan integer between 0 and 65535. The default is1.
g. Set the firewall zonefor the tunnel. This is used by packet filtering rulesand accesscontrol
lists to restrict network traffic on the tunnel.
i. Use the ?to determine available zones:
(config vpn l2tp lac lac_tunnel)> zone ?
Zone: The firewall zone assigned to this tunnel. This can be used
by packet
filtering rules and access control lists to restrict network
traffic on this
tunnel.
Format:
any
dynamic_routes
edge
external
hotspot
internal
ipsec
loopback
setup
Current value:
(config vpn l2tp lac lac_tunnel)>
To Next Page
Loading...
Need help?
General