Central management Configureyour device for Digi Remote Manager support
IX20 User Guide
65
3. Click Central management.
The Central management configuration window isdisplayed.
Digi Remote Manager support is enabled by default. To disable, toggle off Enable central
management.
4. For Service, select Digi Remote Manager.
5. (Optional) For Management server, type the URL for the central management server.
The default variesdepending on firmware versions:
n
Firmware version 22.2.9.x and newer, the default is the edp12.devicecloud.com. This
server is for device-connectivity only, and uses enhanced security through certificate-
based communication. See Digi Remote Manager support for further infomation.
n
Firmware prior to version 22.2.9.x, the default is the Digi Remote Manager server,
https://remotemanager.digi.com.
6. (Optional) For Management port, type the destination port for the remote cloud services
connection. The default is 3199.
7. Firmware server should normally beleft at the default location.
8. (Optional) For Speedtest server, type the name or IPaddressof the server to use to test the
speed of the device'sinternet connection(s).
9. (Optional) For Retry interval, type the amount of time that the IX20 device should wait before
reattempting to connect to remote cloud services after being disconnected. Thedefault is 30
seconds.
Allowed values are any number of hours, minutes, or seconds, and take the format number
{h|m|s}.
For example, to set Retry interval to ten minutes, enter 10m or 600s.
10. (Optional) For Keep-alive interval, type the amount of time that the IX20 device should wait
between sending keep-alive messagesto remote cloud serviceswhen using a non-cellular
interface. The default is 60 seconds.
Allowed values are any number of hours, minutes, or seconds, and take the format number
{h|m|s}.
For example, to set Keep-alive interval to ten minutes, enter 10m or 600s.
11. (Optional) For Cellular keep-alive interval, type the amount of time that the IX20 device
should wait between sending keep-alive messagesto remote cloud serviceswhen using a
cellular interface. The default is 290 seconds.
To Next Page
Loading...
Need help?
General