Services Location information
IX20 User Guide
714
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services> Location > Destination servers.
4. For Add destination server, click .
5. (Optional) For Label, type a description of the location destination server.
6. For Destination server, enter the hostname or IPaddressof the remote host to which location
messageswill be sent.
7. For Destination server port, enter the UDPor TCPport on the remote host to which location
messageswill be sent.
8. For Communication protocol, select either UDP or TCP.
9. For Forward interval multiplier, select the number of Location update intervalsto wait
before forwarding location data to this server. See Configure the location service for more
information about setting the Location update interval.
10. For NMEAfilters, select the filters that represent the typesof messages that will be forwarded.
By default, all message typesare forwarded.
n
To remove a filter:
a. Click the down arrow () next to the appropriate message type.
b. Click Delete.
n
To add a message type:
a. For Add NMEA filter or Add TAIP filter, click .
b. Select the filter type. Allowed values are:
l
GGA: Reports time, position, and fix related data.
l
GLL: Reports position data: position fix, time of position fix, and status.
l
GSA: ReportsGPSDOPand active satellites.
l
GSV: Reports the number of SVsin view, PRN, elevation, azimuth, and SNR.
To Next Page
Loading...
Need help?
General