Digi IX20 User Manual

Services Location information
IX20 User Guide
717
all remote
sources, and all forwarded sentences from remote sources will use
the configured
ID.
Format:
Default
GA
GB
GI
GL
GN
GP
GQ
Default value: Default
Current value: Default
(config service location forward 0)>
ii. Set the talker ID:
(config service location forward 0)> talker_id value
(config service location forward 0)>
The default setting is Default, which means that the talker IDprovided by the source will
be used.
b. Determine the behavior when fix is invalid:
(config service location forward 0)> no_fix value
(config service location forward 0)>
where value is one of:
n
none: No messages are sent.
n
empty: Send messageswith empty fields.
n
last_fix: Send messages with information from the last valid fix.
The default is empty.
9. (Optional) Set the text to prepend to the forwarded message. Two variables can be included in
the prepended text:
n
%s: Includes the IX20 device's serial number in the prepended text.
n
%v: Includes the vehicle IDin the prepended text.
(config service location forward 0)> prepend __|%s|__|%v|__
(config service location forward 0)>
10. (Optional) Set the vehicle ID.
Allowed value is a four digit alphanumerical string (for example, 01A3 or 1234). If no vehicle ID
isconfigured, this setting defaults to 0000.
(config service location forward 0)> vehicle-id 1234
(config service location forward 0)>
11. (Optional) Provide a description of the remote host:

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)