To Next Page

To Previous Page

Services Location information

IX20 User Guide

728

6. Define actionsto be taken when the device'slocation triggers a geofence event:

To define actionsthat will be taken when the device enters the geofence, or isinside

the geofence when it boots:

a. (Optional) Configure the device to preform the actionsif the device is inside the

geofence when it boots:

(config)> service location geofence test_geofence on_entry

bootup true

(config)>

b. Set the number of update_intervals that must take place prior to performing the

actions:

(config)> service location geofence test_geofence on_entry num_

intervals int

(config)>

For example, if the update interval is 1m (one minute) and the num_intervalsis set

to 3, the actionswill not be performed until the device has been inside the

geofence for three minutes.

c. Add an action:

i. Type... to return to the root of the configuration:

(config service location geofence test_geofence coordinates

3)> ...

(config)>

ii. Add the action:

(config)> add service location geofence test_geofence on_

entry action end

(config service location geofence test_geofence on_entry

action 0)>

d. Set the type of action:

(config service location geofence test_geofence on_entry action

0)> type value

Digi IX20 User Manual

Questions and Answers: