Digi IX20 User Manual

Applications Develop Python applications
IX20 User Guide
803
l
LEDs: digidevice.led
l
SMS: digidevice.sms
l
GPS: digidevice.location
l
Digi Remote Manager:
o
digidevice.datapoint
o
digidevice.device_request
o
digidevice.name
l
Device configuration: digidevice.config
l
Command line interface: digidevice.cli
l
Access runtime database: digidevice.runt
l
Set the maintenance window: digidevice.maintenance
n
Use the Python serial module—pySerial—to accessthe serial ports.
n
Eclipse Paho MQTT Python client enables applicationsto connect to an MQTTbroker to
publish messages, and to subscribe to topics and receivepublished messages.
Note Module-related documentation is in the Digidevice module section.
Digidevice module
The Python digidevice module provides platform-specific extensionsthat allow you to interact with
the device’s configuration and interfaces. The following submodules are included with the digidevice
module:
This section contains the following topics:

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)