Enterasys D2 D2G124-12P

show dot1x auth-config
15-12 Security Configuration
Parameters
Defaults
Ifnoparametersarespecified,all802.1Xsettingswillbedisplayed.
Ifport‐stringisnotspecified,informationforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Examples
ThisexampleshowshowtodisplaytheEAPOLportcontrolmodeforge.1.1:
D2(su)->show dot1x auth-config authcontrolled-portcontrol ge.1.1
Port 1: Auth controlled port control: Auto
Thisexampleshowshowtodisplaythe802.1X quietperiodsettingsforge.1.1:
D2(su)->show dot1x auth-config quietperiod ge.1.1
Port 1: Quiet period: 30
authcontrolled‐
portcontrol
(Optional)DisplaysthecurrentvalueofthecontrolledPortcontrol
parameterfortheport.
maxreq (Optional)Displaysthevaluesetformaximumrequestscurrentlyinuseby
thebackendauthenticationstatemachine.
quietperiod (Optional)Displaysthevaluesetforquietperiodcurrentlyinusebythe
authenticatorPAEstatemachine.
reauthenabled (Optional)
Displaysthestateofreauthenticationcontrolusedbythe
ReauthenticationTimerstatemachine.
reauthperiod (Optional)Displaysthevalue,inseconds,setforthereauthentication
periodusedbythereauthenticationtimerstatemachine.
servertimeout (Optional)Displaystheservertimeoutvalue,inseconds,currentlyinuse
bythebackendauthenticationstatemachine.
supptimeout (Optional)Displaysthe
authenticationsupplicanttimeoutvalue,in
seconds,currentlyinusebythebackendauthenticationstatemachine.
txperiod (Optional)Displaysthetransmissionperiodvalue,inseconds,currentlyin
usebytheauthenticatorPAEstatemachine.
port‐string (Optional)Limitsthedisplayofdesiredinformationinformationtospecific
port(s).Foradetaileddescriptionofpossible
port‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 4‐1.