H3C MSR Series

978
[Sysname] attack-defense login reauthentication-delay 5
attack-defense policy
Use attack-defense policy to create an attack defense policy and enter its view, or enter the view of
an existing attack defense policy.
Use undo attack-defense policy to delete an attack defense policy.
Syntax
attack-defense policy policy-name
undo attack-defense policy policy-name
Default
No attack defense policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Assigns a name to the attack defense policy. The policy name is a case-insensitive
string of 1 to 31 characters. Valid characters include uppercase and lowercase letters, digits,
underscores (_), and hyphens (-).
Examples
# Create the attack defense policy atk-policy-1 and enter its view.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1]
Related commands
attack-defense apply policy
display attack-defense policy
attack-defense signature log non-aggregate
Use attack-defense signature log non-aggregate to enable log non-aggregation for single-packet
attack events.
Use undo attack-defense signature log non-aggregate to restore the default.
Syntax
attack-defense signature log non-aggregate
undo attack-defense signature log non-aggregate
Default
Log non-aggregation is disabled for single-packet attack events.
Views
System view