213
<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME
000d-88f8-0577 1 Security GE1/0/1 NOAGED
--- 1 mac address(es) found ---
# Display information about secure MAC addresses of GigabitEthernet 1/0/1 in VLAN 1.
<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1 vlan
1
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME
000d-88f8-0577 1 Security GE1/0/1 NOAGED
--- 1 mac address(es) found ---
Table 19 Command output
MAC ADDR Secure MAC address.
VLAN ID ID of the VLAN to which the port belongs.
STATE
Type of the MAC address added. This field displays
Security
for a
secure MAC address.
PORT INDEX Port to which the secure MAC address belongs.
AGING TIME
Period of time before the secure MAC address ages out.
• If the secure MAC address is a static MAC address, this field
displays NOAGED.
• If the secure MAC address is a sticky MAC address, this field
displays the remaining lifetime in minutes. By default, sticky
MAC addresses do not age out, and this field displays
NOAGED.
number mac address(es) found Number of secure MAC addresses stored.
Related commands
port-security mac-address security
port-security authorization ignore
Use port-security authorization ignore to configure a port to ignore the authorization information
received from the authentication server (a RADIUS server or the local device).
Use undo port-security authorization ignore to restore the default.
Syntax
port-security authorization ignore
undo port-security authorization ignore
Default
A port uses the authorization information from the server.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General
