H3C MSR Series Command Reference

1061
Parameters
ip-address: Specifies the IPv4 address to be protected. The ip-address argument cannot be
255.255.255.255 or 0.0.0.0.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the protected IP
address belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
Do not specify this option if the protected IP address is on the public network.
threshold threshold-value: Specifies the threshold for triggering ICMP flood attack prevention. The
value range is 1 to 1000000 in units of ICMP packets sent to the specified IP address per second.
action: Specifies the actions when an ICMP flood attack is detected. If no action is specified, the
global actions set by the icmp-flood action command apply.
drop: Drops subsequent ICMP packets destined for the protected IP address.
logging: Enables logging for ICMP flood attack events.
none: Takes no action.
Usage guidelines
With ICMP flood attack detection configured for an IP address, the device is in attack detection state.
When the sending rate of ICMP packets to the IP address reaches the threshold, the device enters
prevention state and takes the specified actions. When the rate is below the silence threshold
(three-fourths of the threshold), the device returns to the attack detection state.
Examples
# Configure ICMP flood attack detection for 192.168.1.2 in the attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] icmp-flood detect ip 192.168.1.2 threshold
2000
Related commands
icmp-flood action
icmp-flood detect non-specific
icmp-flood threshold
icmp-flood detect non-specific
Use icmp-flood detect non-specific to enable global ICMP flood attack detection.
Use undo icmp-flood detect non-specific to disable global ICMP flood attack detection.
Syntax
icmp-flood detect non-specific
undo icmp-flood detect non-specific
Default
Global ICMP flood attack detection is disabled.
Views
Attack defense policy view
Predefined user roles
network-admin

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS