H3C MSR Series

338
Related commands
display portal
portal extend-auth domain
Use portal extend-auth domain to specify the authentication domain for third-party authentication.
Use undo portal extend-auth domain to remove the authentication domain for third-party
authentication.
Syntax
portal extend-auth domain domain-name
undo portal extend-auth domain
Default
No authentication domain is specified for third-party authentication.
Views
Interface view
Service template view
Predefined user roles
network-admin
Parameters
domain-name: Specifies an ISP domain by its name, a case-insensitive string of 1 to 255 characters.
Usage guidelines
The specified ISP domain takes effect only on IPv4 portal users that use third-party authentication.
Examples
# Specify authentication domain my-domain for third-party authentication on GigabitEthernet 1/0/1.
(Wired application.)
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname–GigabitEthernet1/0/1] portal extend-auth domain my-domain
# Specify authentication domain my-domain for third-party authentication on service template
service1. (Wireless application.)
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] portal extend-auth domain my-domain
Related commands
display portal
portal extend-auth-server
Use portal extend-auth-server to create a third-party authentication server and enter its view, or
enter the view of an existing third-party authentication server.
Use undo portal extend-auth-server to delete a third-party authentication server.
Syntax
portal extend-auth-server { qq | mail }