189
MAC authentication commands
MAC authentication commands are supported only on the following ports:
• Layer 2 Ethernet ports on the following modules:
HMIM-8GSW.
HMIM-24GSW.
HMIM-24GSWP.
SIC-4GSW.
• Fixed Layer 2 Ethernet ports on the following routers:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-LM-HK/810-W-LM-HK/810-10-PoE/81
0-LMS/810-LUS.
MSR2600-10-X1.
MSR3600-28/3600-51.
MSR3600-28-SI/3600-51-SI.
Commands and descriptions for centralized devices apply to the following routers:
• MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
• MSR2600-10-X1.
• MSR 2630.
• MSR3600-28/3600-51.
• MSR3600-28-SI/3600-51-SI.
• MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.
• MSR 3610/3620/3620-DP/3640/3660.
Commands and descriptions for distributed devices apply to the following routers:
• MSR5620.
• MSR 5660.
• MSR 5680.
WLAN is not supported on the following routers:
• MSR810-LMS/810-LUS.
• MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.
• MSR3600-28-SI/3600-51-SI.
• MSR5620/5660/5680.
The term "AP" in this document refers to MSR routers that support WLAN.
display mac-authentication
Use display mac-authentication to display MAC authentication settings and statistics. The output
includes the global settings, port-specific settings, MAC authentication statistics, and online user
statistics.
Syntax
Wireless devices:
display mac-authentication [ ap ap-name [ radio radio-id ] | interface interface-type
interface-number ]