H3C MSR Series

204
reset mac-authentication statistics
Use reset mac-authentication statistics to clear MAC authentication statistics.
Syntax
Wireless devices:
reset mac-authentication statistics [ ap ap-name [ radio radio-id ] | interface interface-type
interface-number ]
Wired devices:
reset mac-authentication statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. The string
can contain letters, digits, underscores (_), left brackets ([), right brackets (]), forward slashes (/), and
hyphens (-). If you do not specify an AP, this command clears MAC authentication statistics for all
APs.
radio radio-id: Specifies a radio by its ID. The value range for the radio-id argument varies by device
model. If you do not specify a radio, this command clears MAC authentication statistics for all radios
on the specified AP.
interface interface-type interface-number: Specifies a port by its type and number. If you do not
specify a port, this command clears both global and port-specific MAC authentication statistics.
Examples
# Clear MAC authentication statistics on port GigabitEthernet 1/0/1.
<Sysname> reset mac-authentication statistics interface gigabitethernet 1/0/1
Related commands
display mac-authentication