H3C MSR Series

151
search-base-dn
Use search-base-dn to specify the base DN for user search.
Use undo search-base-dn to restore the default.
Syntax
search-base-dn base-dn
undo search-base-dn
Default
No base DN is specified for user search.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
base-dn: Specifies the base DN for user search, a case-insensitive string of 1 to 255 characters.
Examples
# Specify the base DN for user search as dc=ldap,dc=com for LDAP server ccc.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] search-base-dn dc=ldap,dc=com
Related commands
display ldap scheme
ldap server
search-scope
Use search-scope to specify the user search scope.
Use undo search-scope to restore the default.
Syntax
search-scope { all-level | single-level }
undo search-scope
Default
The user search scope is all-level.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
all-level: Specifies that the search goes through all subdirectories of the base DN.