H3C MSR Series

193
display mac-authentication connection
Use display mac-authentication connection to display information about online MAC
authentication users.
Syntax
Wireless devices:
Centralized devices in standalone mode:
display mac-authentication connection [ ap ap-name [ radio radio-id ] | interface interface-type
interface-number | user-mac mac-address | user-name user-name ]
Centralized devices in IRF mode:
display mac-authentication connection [ ap ap-name [ radio radio-id ] | interface interface-type
interface-number | slot slot-number | user-mac mac-address | user-name user-name ]
Wired devices:
Centralized devices in standalone mode:
display mac-authentication connection [ interface interface-type interface-number | user-mac
mac-address | user-name user-name ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display mac-authentication connection [ interface interface-type interface-number | slot
slot-number | user-mac mac-address | user-name user-name ]
Distributed devices in IRF mode:
display mac-authentication connection [ chassis chassis-number slot slot-number | interface
interface-type interface-number | user-mac mac-address | user-name user-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. The string
can contain letters, digits, underscores (_), left brackets ([), right brackets (]), forward slashes (/), and
hyphens (-). If you do not specify an AP, this command displays information about online MAC
authentication users for all APs.
radio radio-id: Specifies a radio by its ID. The value range for the radio-id argument varies by device
model. If you do not specify a radio, this command displays information about online MAC
authentication users for all radios on the specified AP.
interface interface-type interface-number: Specifies a port by its type and number. If you do not
specify a port, this command displays information about the online MAC authentication users for all
ports.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays information about the online MAC authentication users for all cards. (Distributed devices in
standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information about the online MAC authentication users for all
member devices. (Centralized devices in IRF mode.)