1039
Type Type of the protected IPv6 address,
Manual
or
Dynamic
.
Requested Number of packets destined for the protected IPv6 address.
Trusted Number of packets that passed the client verification.
Related commands
client-verify protected ipv6
display client-verify trusted ip
Use display client-verify trusted ip to display trusted IPv4 addresses for client verification.
Syntax
Centralized devices in standalone mode:
display client-verify { dns | http | tcp } trusted ip [ ip-address [ vpn vpn-instance-name ] ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display client-verify { dns | http | tcp } trusted ip [ ip-address [ vpn vpn-instance-name ] ] [ slot
slot-number ] [ count ]
Distributed devices in IRF mode:
display client-verify { dns | http | tcp } trusted ip [ ip-address [ vpn vpn-instance-name ] ]
[ chassis chassis-number slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dns: Specifies the DNS client verification feature.
http: Specifies the HTTP client verification feature.
tcp: Specifies the TCP client verification feature.
ip-address: Specifies a trusted IPv4 address. If you do not specify an IPv4 address, this command
displays all trusted IPv4 addresses.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the trusted IPv4
address belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
Do not specify this option if the trusted IPv4 address is on the public network.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays trusted IPv4 addresses for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays trusted IPv4 addresses for all member devices. (Centralized devices
in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
trusted IPv4 addresses for all cards. (Distributed devices in IRF mode.)