H3C MSR Series

90
Syntax
attribute remanent-volume unit { byte | giga-byte | kilo-byte | mega-byte }
undo attribute remanent-volume unit
Default
The data measurement unit is kilobyte for the Remanent_Volume attribute.
Views
RADIUS scheme view
Predefined user roles
network-admin
network-operator
Parameters
byte: Specifies the unit as byte.
giga-byte: Specifies the unit as gigabyte.
kilo-byte: Specifies the unit as kilobyte.
mega-byte: Specifies the unit as megabyte.
Usage guidelines
Make sure the measurement unit is the same as the user data measurement unit on the RADIUS
server.
Examples
# In RADIUS scheme radius1, set the data measurement unit to kilobyte for the Remanent_Volume
attribute.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute remanent-volume unit kilo-byte
Related commands
display radius scheme
client
Use client to specify a RADIUS DAC.
Use undo client to remove the specified RADIUS DAC.
Syntax
client { ip ipv4-address | ipv6 ipv6-address } [ key { cipher | simple } string | vpn-instance
vpn-instance-name ] *
undo client { ip ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
Default
No RADIUS DACs are specified.
Views
RADIUS DAS view
Predefined user roles
network-admin