EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #241 background imageLoading...
Page #241 background image
218
After you execute this command, you cannot manually configure sticky MAC addresses, and secure
MAC addresses learned by a port in autoLearn mode are dynamic. All dynamic MAC addresses are
lost at reboot. Use this command when you want to clear all sticky MAC addresses after a device
reboot.
You can display dynamic secure MAC addresses by using the display port-security mac-address
security command.
The undo port-security mac-address dynamic command converts all dynamic secure MAC
addresses on the port to sticky MAC addresses. You can manually configure sticky MAC addresses.
Examples
# Enable the dynamic secure MAC feature on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet1/0/1
[Sysname-GigabitEthernet1/0/1] port-security mac-address dynamic
Related commands
display port-security
display port-security mac-address security
port-security mac-address security
Use port-security mac-address security to add a secure MAC address.
Use undo port-security mac-address security to remove a secure MAC address.
Syntax
In Layer 2 Ethernet interface view:
port-security mac-address security [ sticky ] mac-address vlan vlan-id
undo port-security mac-address security [ sticky ] mac-address vlan vlan-id
In system view:
port-security mac-address security [ sticky ] mac-address interface interface-type
interface-number vlan vlan-id
undo port-security mac-address security [ [ mac-address [ interface interface-type
interface-number ] ] vlan vlan-id ]
Default
No manually configured secure MAC address entries exist.
Views
System view
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
sticky mac-address: Specifies a sticky MAC address, in H-H-H format. If you do not specify this
keyword, the command configures a static secure MAC address.
interface interface-type interface-number: Specifies a Layer 2 Ethernet port by its type and number.
vlan vlan-id: Specifies the VLAN that has the secure MAC address. The value range for the vlan-id
argument is 1 to 4094.

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals