473
Views
PKI entity view
Predefined user roles
network-admin
Parameters
ip-address: Specifies an IPv4 address.
interface interface-type interface-number: Specifies an interface by its type and number. The
primary IPv4 address of the interface will be used as the IP address of the PKI entity.
Usage guidelines
Use this command to assign an IP address to a PKI entity or specify an interface for the entity. The
interface's primary IPv4 address will be used as the IP address of the PKI entity. If you specify an
interface, make sure the interface is assigned an IP address before the PKI entity requests a
certificate.
Examples
# Assign IP address 192.168.0.2 to PKI entity en.
<Sysname> system-view
[Sysname] pki entity en
[Sysname-pki-entity-en] ip 192.168.0.2
ldap-server
Use ldap-server to specify an LDAP server for a PKI domain.
Use undo ldap-server to restore the default.
Syntax
ldap-server host hostname [ port port-number ] [ vpn-instance vpn-instance-name ]
undo ldap-server
Default
No LDAP server is specified for a PKI domain.
Views
PKI domain view
Predefined user roles
network-admin
Parameters
host hostname: Specifies an LDAP server by its IPv4 address, IPv6 address, or domain name. The
domain name is a case-sensitive string of 1 to 255 characters.
port port-number: Specifies the port number of the LDAP server. The value range is 1 to 65535, and
the default is 389.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If the LDAP server is on the public network, do not specify
this option.
Usage guidelines
You must specify an LDAP server for a PKI domain in the following situations:
• The certificate repository uses LDAP for certificate distribution.
To Next Page
Loading...
Need help?
General
