314
Examples
# Set the maximum number of times for retransmitting a logout notification packet to 3 and the retry
interval to 5 seconds.
<Sysname> system-view
[Sysname] portal server pt
[Sysname-portal-server-pt] logout-notify retry 3 interval 5
Related commands
display portal server
mail-domain-name
Use mail-domain-name to specify an email domain name for email authentication.
Use undo mail-address to remove an email domain name for email authentication.
Syntax
mail-domain-name string
undo mail-domain-name [ string ]
Default
No email domain names are specified for email authentication.
Views
Email authentication server view
Predefined user roles
network-admin
Parameters
string: Specifies an email domain name for email authentication, a case-sensitive string of 1 to 255
characters, in the format of @XXX.XXX. If you do not specify an email domain name in the undo
form of this command, this command removes all email domain names for email authentication.
Usage guidelines
After you configure this command, the device performs email authentication only on portal users that
use the specified email domain names.
You can specify a maximum of 16 email domain names for email authentication.
Examples
# Specify @qq.com and @sina.com email domain names for email authentication.
<Sysname> system-view
[Sysname] portal extend-auth-server mail
[Sysname-portal-extend-auth-server-mail] mail-domain-name @qq.com
[Sysname-portal-extend-auth-server-mail] mail-domain-name @Sina.com
Related commands
display portal extend-auth-server
mail-protocol
Use mail-protocol to specify protocols for email authentication.
Use undo mail-protocol to restore the default.
To Next Page
Loading...
Need help?
General
