141
<Sysname> system-view
[Sysname] ldap scheme test
[Sysname-ldap-test] attribute-map map1
Related commands
display ldap-scheme
ldap attribute-map
authentication-server
Use authentication-server to specify the LDAP authentication server for an LDAP scheme.
Use undo authentication-server to restore the default.
Syntax
authentication-server server-name
undo authentication-server
Default
No LDAP authentication server is specified.
Views
LDAP scheme view
Predefined user roles
network-admin
Parameters
server-name: Specifies the name of an existing LDAP server, a case-insensitive string of 1 to 64
characters.
Usage guidelines
You can specify only one LDAP authentication server in an LDAP scheme. If you execute this
command multiple times, the most recent configuration takes effect.
Examples
# In LDAP scheme ldap1, specify the LDAP authentication server as ccc.
<Sysname> system-view
[Sysname] ldap scheme ldap1
[Sysname-ldap-ldap1] authentication-server ccc
Related commands
display ldap scheme
ldap server
authorization-server
Use authorization-server to specify the LDAP authorization server for an LDAP scheme.
Use undo authorization-server to restore the default.
Syntax
authorization-server server-name
undo authorization-server
To Next Page
Loading...
