H3C MSR Series

1068
Predefined user roles
network-admin
network-operator
Examples
# Clear top 10 attack statistics.
<Sysname> reset attack-defense top-attack-statistics
Related commands
attack-defense top-attack-statistics enable
display attack-defense top-attack-statistics
reset blacklist ip
Use rest blacklist ip to clear dynamic IPv4 blacklist entries.
Syntax
reset blacklist ip { source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peer
ds-lite-peer-address ] | all }
Views
User view
Predefined user roles
network-admin
Parameters
source-ip-address: Specifies the IPv4 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv4 address is on the public network.
ds-lite-peer ds-lite-peer-address: Specifies the IPv6 address of the B4 element of the DS-Lite tunnel
that transmits packets from the blacklisted IPv4 address. Do not specify this option if the IPv4
address is on the public network.
all: Specifies all dynamic IPv4 blacklist entries.
Usage guidelines
This command deletes dynamic IPv4 blacklist entries. To delete manual IPv4 blacklist entries, use
the undo blacklist ip command.
Examples
# Clear all dynamic IPv4 blacklist entries.
<Sysname> reset blacklist ip all
Related commands
display blacklist ip
reset blacklist ipv6
Use rest blacklist ipv6 to clear dynamic IPv6 blacklist entries.
Syntax
reset blacklist ipv6 { source-ipv6-address [ vpn-instance vpn-instance-name ] | all }