H3C MSR Series Command Reference

150
Examples
# In LDAP attribute map map1, map a partial value string of the LDAP attribute named memberof to
AAA attribute named user-group.
<Sysname> system-view
[Sysname] ldap attribute-map map1
[Sysname-ldap-map-map1] map ldap-attribute memberof prefix cn= delimiter , aaa-attribute
user-group
Related commands
ldap attribute-map
user-group
user-profile
protocol-version
Use protocol-version to specify the LDAP version.
Use undo protocol-version to restore the default.
Syntax
protocol-version { v2 | v3 }
undo protocol-version
Default
The LDAP version is LDAPv3.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
v2: Specifies the LDAP version LDAPv2.
v3: Specifies the LDAP version LDAPv3.
Usage guidelines
For successful LDAP authentication, the LDAP version used by the device must be consistent with
the version used by the LDAP server.
If you change the LDAP version, the change is effective only on the LDAP authentication that occurs
after the change.
A Microsoft LDAP server supports only LDAPv3.
Examples
# Specify the LDAP version as LDAPv2 for LDAP server ccc.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] protocol-version v2
Related commands
display ldap scheme

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS