H3C MSR Series

778
Syntax
login-message { chinese chinese-message | english english-message }
undo login-message { chinese | english }
Default
The login message is Welcome to SSL VPN.
Views
SSL VPN context view
Predefined user roles
network-admin
Parameters
chinese chinese-message: Configures a login message in Chinese, a case-sensitive string of 1 to
255 characters.
english english-message: Configures a login message in English, a case-sensitive string of 1 to 255
characters.
Examples
# Configure the login message as hello.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] login-message english hello
logo
Use logo to specify a logo to be displayed on SSL VPN webpages.
Use undo logo to restore the default.
Syntax
logo { file file-name | none }
undo logo
Default
The logo displayed on SSL VPN webpages is H3C.
Views
SSL VPN context view
Predefined user roles
network-admin
Parameters
file file-name: Specifies a logo file by its name, a case-insensitive string of 1 to 255 characters. The
file must be a .gif, .jpg, or .png file, and its size cannot exceed 100 KB. As a best practice, use a file
whose image resolution is 110*30 pixels.
none: Specifies that no logo is displayed.
Usage guidelines
The specified logo file must exist on the local device.
After you specify a logo file, the logo is displayed on SSL VPN webpages even if the file is deleted.