H3C MSR Series Command Reference

605
[Sysname-ike-keychain-key1] pre-shared-key address 1.1.1.2 255.255.255.255 key simple
123456TESTplat&!
Related commands
authentication-method
keychain
priority (IKE keychain view)
Use priority to specify a priority for an IKE keychain.
Use undo priority to restore the default.
Syntax
priority priority
undo priority
Default
The priority of an IKE keychain is 100.
Views
IKE keychain view
Predefined user roles
network-admin
Parameters
priority priority: Specifies a priority number in the range of 1 to 65535. The lower the priority number,
the higher the priority.
Usage guidelines
To determine the priority of an IKE keychain, the device examines the existence of the match local
address command before examining the priority number. An IKE keychain with the match local
address command configured has a higher priority than an IKE keychain that does not have the
match local address command configured.
Examples
# Set the priority to 10 for the IKE keychain key1.
<Sysname> system-view
[Sysname] ike keychain key1
[Sysname-ike-keychain-key1] priority 10
priority (IKE profile view)
Use priority to specify a priority for an IKE profile.
Use undo priority to restore the default.
Syntax
priority priority
undo priority
Default
The priority of an IKE profile is 100.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS