H3C MSR Series Command Reference

870
Field
Description
Total entries found Total number of found relation entries.
display session statistics ipv4
Use display session statistics ipv4 to display IPv4 unicast session statistics.
Syntax
Centralized devices in standalone mode:
display session statistics ipv4 { source-ip source-ip | destination-ip destination-ip | protocol
{ dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite } | source-port source-port | destination-port
destination-port } *
Distributed devices in standalone mode/centralized devices in IRF mode:
display session statistics ipv4 { source-ip source-ip | destination-ip destination-ip | protocol
{ dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite } | source-port source-port | destination-port
destination-port } * [ slot slot-number ]
Distributed devices in IRF mode:
display session statistics ipv4 { source-ip source-ip | destination-ip destination-ip | protocol
{ dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite } | source-port source-port | destination-port
destination-port } * [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-ip source-ip: Specifies a source IPv4 address for a unicast session from the initiator to the
responder.
destination-ip destination-ip: Specifies a destination IPv4 address for a unicast session from the
initiator to the responder.
protocol { dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite }: Specifies an IPv4 transport layer
protocol, including DCCP, ICMP, RawIP, SCTP, TCP, UDP, and UDP-Lite.
source-port source-port: Specifies a source port by its number. The source-port argument specifies
the source port of an IPv4 unicast session from the initiator to the responder. The value range for the
source-port argument is 0 to 65535.
destination-port destination-port: Specifies a destination port by its number. The destination-port
argument specifies the destination port of an IPv6 unicast session from the initiator to the responder.
The value range for the destination-port argument is 0 to 65535.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays IPv4 unicast session statistics for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv4 unicast session statistics for all member devices. (Centralized
devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS