653
Group domain VPN commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
The following matrix shows the feature and hardware compatibility:
Group domain VPN compatibility
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE
/810-LM-HK/810-W-LM-HK/810-LMS/810-LUS
No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI No
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC Yes
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 Yes
client anti-replay window
Use client anti-replay window to set the anti-replay window size for a GDOI GM group.
Use undo client anti-replay window to restore the default.
Syntax
client anti-replay window { sec seconds | msec milliseconds }
undo client anti-replay window
Default
The anti-replay window size is not set for a GDOI GM group.
Views
GDOI GM group view
Predefined user roles
network-admin
Parameters
sec seconds: Specifies the anti-replay window size in seconds in the range of 1 to 100.
msec milliseconds: Specifies the anti-replay window size in milliseconds in the range of 100 to
10000.
Usage guidelines
The anti-replay window size set in this command takes precedence over the anti-replay window size
obtained from the KS.
This command must be used together with the Cisco IP-D3P feature.
To Next Page
Loading...
