EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #737 background imageLoading...
Page #737 background image
714
dscp dscp-value: Specifies the DSCP value in the IPv4 SSH packets. The value range for the
dscp-value argument is 0 to 63, and the default value is 48. The DSCP value determines the
transmission priority of the packet.
escape character: Specifies a case-sensitive escape character. By default, the escape character is a
tilde (~).
public-key keyname: Specifies the host public key of the server that the client uses to authenticate
the server. The keyname argument is a case-insensitive string of 1 to 64 characters.
source: Specifies a source IPv4 address or source interface for SSH packets. By default, the device
uses the primary IPv4 address of the output interface in the routing entry as the source IPv4 address
of SSH packets. As a best practice to ensure successful IPv4 Stelnet connections, specify a
loopback interface or dialer interface as the source interface or specify that interface's IPv4 address
as the source IPv4 address.
interface interface-type interface-number: Specifies a source interface by its type and number. The
primary IPv4 address of this interface is the source IPv4 address of the SSH packets.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
The combination of an escape character and a dot (.) works as an escape sequence. This escape
sequence is typically used to quickly terminate an SSH connection when the server reboots or
malfunctions.
For the escape sequence to take effect, you must enter it at the very beginning of a line. If you have
entered other characters or performed operations in a line, enter the escape sequence in the next
line.
As a best practice, use the default escape character (~). Do not use any character in SSH
usernames as the escape character.
Examples
# Establish a connection to the IPv4 Stelnet server 3.3.3.3 and specify the public key of the server as
svkey. The Stelnet client uses publickey authentication. Specify the dollar sign ($) as the escape
character. Use the following algorithms:
Preferred key exchange algorithm: dh-group14-sha1.
Preferred server-to-client encryption algorithm: aes128-cbc.
Preferred client-to-server HMAC algorithm: sha1.
Preferred server-to-client HMAC algorithm: sha1-96.
Preferred compression algorithm: zlib.
<Sysname> ssh2 3.3.3.3 prefer-kex dh-group14-sha1 prefer-stoc-cipher aes128-cbc
prefer-ctos-hmac sha1 prefer-stoc-hmac sha1-96 prefer-compress zlib public-key svkey
escape $
ssh2 ipv6
Use ssh2 ipv6 to establish a connection to an IPv6 Stelnet server.
Syntax
In non-FIPS mode:
ssh2 ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key { dsa | ecdsa | rsa } | prefer-compress zlib | prefer-ctos-cipher
{ 3des-cbc | aes128-cbc | aes256-cbc | des-cbc } | prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange-sha1 | dh-group1-sha1 | dh-group14-sha1 } |
prefer-stoc-cipher { 3des-cbc | aes128-cbc | aes256-cbc | des-cbc } | prefer-stoc-hmac { md5 |

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals