H3C MSR Series

7
[Sysname] domain test
[Sysname-isp-test] accounting ipoe local
# In ISP domain test, perform RADIUS accounting for IPoE users based on scheme rd and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting ipoe radius-scheme rd local
# In ISP domain test, broadcast accounting requests of IPoE users to RADIUS servers in schemes
rd1 and rd2, and use local accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting ipoe broadcast radius-scheme rd1 radius-scheme rd2 local
Related commands
accounting default
local-user
radius scheme
accounting lan-access
Use accounting lan-access to specify accounting methods for LAN users.
Use undo accounting lan-access to restore the default.
Syntax
In non-FIPS mode:
accounting lan-access { broadcast radius-scheme radius-scheme-name1 radius-scheme
radius-scheme-name2 [ local ] [ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ local ] [ none ] }
undo accounting lan-access
In FIPS mode:
accounting lan-access { broadcast radius-scheme radius-scheme-name1 radius-scheme
radius-scheme-name2 [ local ] | local | radius-scheme radius-scheme-name [ local ] }
undo accounting lan-access
Default
The default accounting methods of the ISP domain are used for LAN users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
broadcast: Broadcasts accounting requests to servers in RADIUS schemes.
radius-scheme radius-scheme-name1: Specifies the primary broadcast RADIUS scheme by its
name, a case-insensitive string of 1 to 32 characters.
radius-scheme radius-scheme-name2: Specifies the backup broadcast RADIUS scheme by its
name, a case-insensitive string of 1 to 32 characters.