H3C MSR Series Command Reference

352
mask: Specifies the subnet mask in dotted decimal format.
Usage guidelines
With IPv4 authentication source subnets configured, only packets from IPv4 users on the
authentication source subnets can trigger portal authentication. If an unauthenticated IPv4 user is
not on any authentication source subnet, the access device discards all the user's packets that do
not match any portal-free rule.
If you do not specify the ipv4-network-address argument in the undo portal layer3 source
command, this command deletes all IPv4 portal authentication source subnets on the interface.
Only cross-subnet authentication supports authentication source subnets.
If you configure both an authentication source subnet and an authentication destination subnet on an
interface, only the authentication destination subnet takes effect.
Examples
# Configure an IPv4 portal authentication source subnet of 10.10.10.0/24 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname–GigabitEthernet1/0/1] portal layer3 source 10.10.10.0 24
Related commands
display portal
portal free-all except destination
portal local-web-server
Use portal local-web-server to create a local portal Web server and enter its view, or enter the view
of an existing local portal Web server.
Use undo portal local-web-server to delete the local portal Web server.
Syntax
portal local-web-server { http | https [ ssl-server-policy policy-name ] }
undo portal local-web-server { http | https }
Default
No local portal Web servers exist.
Views
System view
Predefined user roles
network-admin
Parameters
http: Configures the local portal Web server to use HTTP to exchange authentication information
with clients.
https: Configures the local portal Web server to use HTTPS to exchange authentication information
with clients.
ssl-server-policy policy-name: Specifies an existing SSL server policy for HTTPS. The policy name
is a case-insensitive string of 1 to 31 characters. . If you do not specify this option, HTTPS is
associated with the SSL server policy that uses the self-signed certificate. That SSL server policy
supports all cipher suites.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS