1028
VPN instance
MPLS L3VPN instance to which the blacklisted IPv4 address belongs. If
the blacklisted IPv4 address is on the public network, this field displays
hyphens (--).
DS-Lite tunnel peer
IPv6 address of the DS-Lite tunnel peer.
If the device is the AFTR of a DS-Lite tunnel, this field displays the IPv6
address of the B4 element from which the packet comes.
In other situations, this field displays hyphens (--).
Type Type of the IPv4 blacklist entry,
Manual
or
Dynamic
.
TTL(sec)
Remaining aging time of the IPv4 blacklist entry, in seconds. If no aging
time is set for the entry, this field displays
Never
.
Dropped Number of dropped packets sourced from the IPv4 address.
Totally 3 blacklist entries Total number of IPv4 blacklist entries.
Related commands
blacklist ip
display blacklist ipv6
Use display blacklist ipv6 to display IPv6 blacklist entries.
Syntax
Centralized devices in standalone mode:
display blacklist ipv6 [ source-ipv6-address [ vpn-instance vpn-instance-name ] ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display blacklist ipv6 [ source-ipv6-address [ vpn-instance vpn-instance-name ] ] [ slot
slot-number ] [ count ]
Distributed devices in IRF mode:
display blacklist ipv6 [ source-ipv6-address [ vpn-instance vpn-instance-name ] ] [ chassis
chassis-number slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-ipv6-address: Specifies the IPv6 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv6 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv6 address is on the public network.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays IPv6 blacklist entries for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv6 blacklist entries for all member devices. (Centralized devices in
IRF mode.)