346
portal free-rule source
Use portal free-rule source to configure a source-based portal-free rule. The filtering criteria
include source MAC address, source interface, and source VLAN.
Use undo portal free-rule to delete a specific or all portal-free rules.
Syntax
portal free-rule rule-number source { ap ap-name | { interface interface-type interface-number |
mac mac-address | object-group object-group-name | vlan vlan-id } * }
undo portal free-rule { rule-number | all }
Default
No source-based portal-free rules exist.
Views
System view
Predefined user roles
network-admin
Parameters
rule-number: Specifies a portal-free rule number. The value range for this argument is 0 to
4294967295.
ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. Valid
characters are letters, digits, underscores (_), left brackets ([), right brackets (]), slashes (/), and
minus signs (-). This option is applicable only when portal authentication is enabled on a service
template. Support for this option depends on the device model.
The following matrix shows the ap ap-name option and hardware compatibility:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-Po
E/810-LM-HK/810-W-LM-HK
Yes
MSR810-LMS/810-LUS No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI No
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC No
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 No
interface interface-type interface-number: Specifies a source interface by its type and number for
the portal-free rule.
mac mac-address: Specifies a source MAC address for the portal-free rule, in the form of H-H-H.
object-group object-group-name: Specifies a source object group by its name, a case-insensitive
string of 1 to 31 characters.
vlan vlan-id: Specifies a source VLAN ID for the portal-free rule. This option takes effect only on
portal users that access the network through VLAN interfaces.
To Next Page
Loading...
