H3C MSR Series

674
Table 100 Command output
Field
Description
UserPid User process ID.
SessID Session ID.
Ver Protocol version of the SSH server.
Encrypt Encryption algorithm used on the SSH server.
State
Session state:
• Init—Initialization.
• Ver-exchange—Version negotiation.
• Keys-exchange—Key exchange.
• Auth-request—Authentication request.
• Serv-request—Session service request.
• Established—The session is established.
• Disconnected—The session is terminated.
Retries Number of authentication failures.
Serv
Service type:
• SCP.
• SFTP.
• Stelnet.
• NETCONF.
Username Username that the client uses to log in to the server.
Idx
Absolute number of the user line. This field is empty if the SSH
connection for the user is not redirected.
display ssh user-information
Use display ssh user-information to display information about SSH users on an SSH server.
Syntax
display ssh user-information [ username ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
username: Specifies an SSH username, a case-sensitive string of 1 to 80 characters. If you do not
specify an SSH user, this command displays information about all SSH users.
Usage guidelines
This command displays information only about SSH users that are configured by using the ssh user
command on the SSH server.
Examples
# Display information about all SSH users.
<Sysname> display ssh user-information