827
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the maximum detected length to 100000 bytes for NBAR rule abcd.
<Sysname> system-view
[Sysname] nbar application abcd protocol http
[Sysname-nbar-application-abcd] apr set detectlen 100000
Related commands
nbar application
apr signature auto-update
Use apr signature auto-update to enable automatic update for the APR signature database and
enter auto-update configuration view.
Use undo apr signature auto-update to disable automatic update for the APR signature database.
Syntax
apr signature auto-update
undo apr signature auto-update
Default
Automatic update is disabled for the APR signature database.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The following matrix shows the command and hardware compatibility:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM
-HK/810-W-LM-HK
Yes
MSR810-LMS/810-LUS No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI No
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC Yes
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 Yes
Use this command to update the APR signature database if the device can access the signature
database services at the H3C website.
To Next Page
Loading...
