H3C MSR Series

718
Syntax
In non-FIPS mode:
ssh2 algorithm cipher { aes128-cbc | aes256-cbc | 3des-cbc | des-cbc } *
undo ssh2 algorithm cipher
In FIPS mode:
ssh2 algorithm cipher { aes128-cbc | aes256-cbc } *
undo ssh2 algorithm cipher
Default
In non-FIPS mode:
SSH2 uses the encryption algorithms aes128-cbc, aes256-cbc, 3des-cbc, and des-cbc in
descending order of priority for algorithm negotiation.
In FIPS mode:
SSH2 uses the encryption algorithms aes128-cbc and aes256-cbc in descending order of priority
for algorithm negotiation.
Views
System view
Predefined user roles
network-admin
Parameters
aes128-cbc: Specifies the encryption algorithm aes128-cbc.
aes256-cbc: Specifies the encryption algorithm aes256-cbc.
3des-cbc: Specifies the encryption algorithm 3des-cbc.
des-cbc: Specifies the encryption algorithm des-cbc.
Usage guidelines
If you specify the encryption algorithms, SSH2 uses only the specified algorithms for algorithm
negotiation. The algorithm specified earlier has a higher priority during negotiation.
Examples
# Specify the algorithm 3des-cbc as the encryption algorithm for SSH2.
<Sysname> system-view
[Sysname] ssh2 algorithm cipher 3des-cbc
Related commands
display ssh2 algorithm
ssh2 algorithm key-exchange
ssh2 algorithm mac
ssh2 algorithm public-key
ssh2 algorithm key-exchange
Use ssh2 algorithm key-exchange to specify key exchange algorithms for SSH2.
Use undo ssh2 algorithm key-exchange to restore the default.