H3C MSR Series Command Reference

596
Syntax
ike profile profile-name
undo ike profile profile-name
Default
No IKE profiles exist.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name: Specifies an IKE profile name, a case-insensitive string of 1 to 63 characters.
Examples
# Create IKE profile 1 and enter its view.
<Sysname> system-view
[Sysname] ike profile 1
[Sysname-ike-profile-1]
ike proposal
Use ike proposal to create an IKE proposal and enter its view, or enter the view of an existing IKE
proposal.
Use undo ike proposal to delete an IKE proposal.
Syntax
ike proposal proposal-number
undo ike proposal proposal-number
Default
An IKE proposal exists, which has the lowest priority and uses the following settings:
• Encryption algorithm—DES-CBC in non-FIPS mode and AES-CBC-128 in FIPS mode.
• Authentication method—HMAC-SHA1.
• Authentication algorithm—Pre-shared key authentication.
• DH group—Group1 in non-FIPS mode and group14 in FIPS mode.
• IKE SA lifetime—86400 seconds.
You cannot change the settings of the default IKE proposal.
Views
System view
Predefined user roles
network-admin
Parameters
proposal-number: Specifies an IKE proposal number in the range of 1 to 65535. The lower the
number, the higher the priority of the IKE proposal.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS